907-GBES
DUAL GIGABIT ETHERNET MEDIA CONVERTER
907-GBES media converters were discontinued July 19, 2023. For more information please read our Product Change Notification.
Recommended replacement: 907-GEM
Jump To:
Overview
Specifications
Resources
Related Products
Features
- Ethernet switch with four 10/100/1000 Mbps RJ-45 copper ports and one 1.25 Gbaud optical port
- Wavelength selectable/interchangeable SFP transceivers
- Rugged design for harsh environment, including 6000 psi pressure tolerant version
- Compatible with 907-DIAG-E diagnostic card and Graphic User Interface (GUI) software
Benefits
- Provides multi-port Ethernet to optical conversion with a reliable small form-factor card
- Configures RJ-45 ports automatically to link with connected Ethernet device
- Supports a wide range of optical options, including CWDM wavelengths
- Simplifies troubleshooting with advanced diagnostics
Typical Applications
- Remotely Operated Vehicles (ROVs) and Tether Management Systems
- Pipe inspection robots
- Bomb disposal robots
- Video security systems
- Tactical networks and defense systems
- Industrial process control
Specifications
| 907-GBES Specifications | |
| No. Copper Ports | 4 (switched) |
| Data Rates | 10/100/1000 Base-T(X) |
| Total Throughput | ~ 1000 Mbps (0.01% used for embedded diagnostics) |
| Latency | < 0.1 ms (single channel) < 10 ms (10 Mbps port, all ports active) typical, per RFC 2544 |
| Optical Fiber | 1 or 2 singlemode (9/125 μm) |
| Baud Rate | 1.25 Gbaud |
| Format | AME-EP (Moog proprietary) |
| Wavelength | 1310/1550 nm standard (CWDM optional, 1471 - 1611 nm) |
| Flux Budget | > 20 dB (24 dB typical) |
| Power Supply | +5 VDC +/-10%, regulated |
| Current Draw | 1.2 A typical (2 A max.) |
| Power Used | 6 W typical (10 W max.) |
| Voltage Protection | Overvoltage, reverse polarity, 3 A time delay fuse |
| LEDs | Power (electrical), over temperature limit, optical link valid, PHY Rx/Tx activity, Ethernet port link speed |
| Ethernet to PC | Diagnostics from remote and console through 907-DIAG-E card at console |
| Dimensions | PC/104 (form-factor only), 3.550" x 3.775" |
| Weight | < 125 g (0.27 lb), including SFP |
| Optical | Dual LC (SFP) |
| Data (Ethernet) | 4 x RJ-45 |
| Power | 2-pin Molex, 0.156 inch pin spacing |
| Stacking | PC/104 (for stacking 907 cards only) |
| Temperature | -10°C to +60°C (operational) -40°C to +85°C (storage) |
| Humidity | 85% RH, non-condensing |
| Vibration | 5 g, 25 - 1000 Hz, 3 axes |
| Shock | 30 g, 11 ms half-sine, 3 axes |
Resources
Literature
Data Sheets
Technical Support
Telephone: +1-902-468-2263