914-R/C
FIBER OPTIC MULTIPLEXER
914-R/C mulitplexers were discontinued July 7, 2023. For more information please read our Product Change Notification.
Reccomended replacement: 907-E or 914-HDE + 914-VDX
Jump To:
Overview
Specifications
Resources
Related Products
Features
- Low latency (no switch buffer delays)
- Compatible with 10/100/1000 Mbps copper links per IEEE 802.3
- Interchangeable SFP transceivers
- Rugged design for harsh environment, including 6000 psi pressure tolerant version
Benefits
- Provides fast response for time-critical links
- Backwards compatible with legacy 10/100 Mbps links
- Supports a wide range of optical options, including CWDM wavelengths for combining multiple cards on a single optical fiber
Specifications
| 914-GBE Specifications | |
| No. Copper Ports | 1 |
| Ethernet | 10/100/1000 BASE-T(X) |
| Total Throughput | Up to 1000 Mbps |
| Optical Fiber | 1 - 2 singlemode (9/125 µm) |
| Baud Rate | 1.25 Gbaud |
| Wavelength | Optical table; wavelength: 1310/1550 nm standard CWDM 1471 - 1611 nm optional |
| Flux Budget | > 20 dB (24 dB typical). Higher budgets available, contact factory |
| Power Supply | +5 VDC +/-10%, regulated |
| Power Used | 4 W typical |
| Protection | Overvoltage and reverse polarity protection, fused |
| Dimensions | 41 x 89 mm [1.6 x 3.5 inches] |
| Weight | < 90 g (0.2 lb), including SFP |
| Enclosures | On-board diagnostic LEDs including: power, receive optical link valid, Tx and Rx activity, copper link speed and duplex |
| Optical | RJ45 |
| Power | 2-pin Molex, 0.156 inch pin spacing |
| Serial | Molex MicroFit, 8-pin |
| Power | Molex, 0.156” spacing, 2-pin |
| Diagnostic | 12-pin 0.1 inch header |
| Temperature | -20°C to +60°C (operational) -40°C to +85°C (storage) |
| Humidity | 85% RH, non-condensing |
| Vibration | 5 g, 25 - 1000 Hz, 3 axes |
| Shock | 30 g, 11 ms half sine, 3 axes |
Resources
Literature
Data Sheets
Technical Support
Telephone: +1-902-468-2263